Round Type Fiberglass Mini/small Counterflow Cooling Tower for Injection Molding Machine

Product Detail

Round Type Fiberglass Mini/small Counterflow Cooling Tower for Injection Molding Machine

Description of AUVC round cooling tower

AUVC round type fiberglass mini/small counterflow cooling tower for injection molding machine intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top, the water droplet have more direct contact time with air. The wet cooling Towers are cooled with the help of evaporating some proportionate quantity of circulating water.

The AUVC round cooling tower casing is filled with Round type PVC FILLS. The rotating water distributor sprinkler is fixed in the top of the inlet pipeline and the same distributes the hot water evenly over the round Fill media. The sprinkler will be operated with self-propulsion system. The PVC Fills is corrugated with channels between each flutes to prevent the blockage and giving more and large surface area per unit volume. The cold air meets the cold water at the bottom of the infill providing maximum evaporation and heat transfer in the infill.

Finally AUVC round cooling tower are more compact, light in weight, least power consumption, long-lasting, Durable and lowest maintenance expenditure. Since Hot dip galvanized structural and stainless steel fasteners are used, FRP Towers are corrosion Free. 

AUVC round cooling tower adjustable pitch, Aluminum or ABS Fan Blades are directly mounted on the Electric motor [IP 55, with Stainless steel shaft, TEFC Special type cooling tower motor] to avoid excess power consumption and unnecessary gear driven problems. All moving parts can be easily approached from top. So easy maintenance is possible. Smaller capacities are factory assembled and just bolting at site is enough. However higher capacities are assembled into the site only to avoid excess transportation cost. Our range includes 3 to 1000 T.

Technical Parameters of AUVC round cooling tower




MODEL	WATER FLOW      M3/H	DIMENSIONS		FAN ASSEMBLY		PIPE CONNECTIONS(A)
		H	D	MOTOR	FAN      D(mm)	INLET	OUTLET	DRAIN	OVER FLOW	MAKE-UP PIPE
				KW						AUTOMATIC
AB-3	3	1200	650	0.18	300	32	32	-	25	15
AB-5	5	1250	860	0.18	500	40	40	-	25	15
AB-6	6	1410	950	0.18	584	40	40	25	25	15
AB-8	8	1560	950	0.18	584	40	40	25	25	15
AB-10	10	1670	1020	0.18	584	50	50	25	25	15
AB-15	15	1700	1170	0.37	760	50	50	25	25	15
AB-18	18	1780	1270	0.37	760	50	50	25	25	15
AB-20	20	1780	1400	0.37	760	50	50	25	25	15
AB-25	25	1960	1400	0.55	760	50	50	25	25	15
AB-30	30	1980	1620	1.1	884	80	80	25	25	15
AB-40	40	2010	1840	1.1	884	80	80	25	25	15
AB-50	50	2210	1840	1.1	884	80	80	25	25	15
AB-60	60	2400	2000	1.5	1000	100	100	40	40	20
AB-70	70	2530	2230	1.5	1200	100	100	40	40	20
AB-80	80	2800	2500	2.2	1500	100	100	40	40	20
AB-100	100	3200	2900	2.2	1500	150	150	40	40	20
AB-125	125	3130	3300	4	1800	150	150	40	40	20
AB-150	150	3350	3300	4	1800	150	150	50	80	25
AB-175	175	3670	3600	4	1800	150	150	50	80	25
AB-200	200	3900	4000	4	1800	150	150	50	80	25
AB-225	225	4165	4500	5.5	2400	200	200	50	80	25
AB-250	250	4290	4500	5.5	2400	200	200	50	80	25
AB-300	300	4435	4900	7.5	3000	200	200	50	80	25
AB-350	350	4735	5300	11	3000	250	250	80	100	50
AB-400	400	4820	6100	11	3400	250	250	80	100	50
AB-450	450	4820	6100	15	3400	250	250	80	100	50
AB-500	500	5145	6800	15	3700	250	250	80	100	50
AB-600	600	5145	6800	18.5	3700	250	250	80	100	50
AB-700	700	5732	8000	22	4200	300	300	80	100	50
AB-800	800	6050	8000	22	4200	300	300	80	100	50
AB-1000	1000	6390	8880	30	5000	350	350	80	125	50




Packing of AUVC round cooling tower

There are three different kinds of packing:

1.Put product into iron box(When LCL transportation)

2.Put product into wooden box(When LCL transportation) 

3.Nude packing(when container transportation)

Our services

?Best Price & Good Quality for all kinds of cooling tower

?We will according to your actual demand to choice the suitable cooling tower or cooling tower part to you.

?We can provide Oversea technical guidance.

?We can provide install video/photo or go to your country to installation guide if necessary.

Payment Term:

TT 30% deposit  70% balance payable within 3 days once received the copy of shipping docs(CI,PL&BL) Or L/C at sight with irrevocable

Detail of AUVC round cooling tower











Delivery of AUVC round cooling tower



Project case of AUVC round cooling tower